Darklands Roland + DMA workaround For those of you with both Roland and DMA-equipped sound cards, here is a workaround for Darklands, so you can get Roland Music and DMA digital effects in the opening and closing animations. Its almost too simple, and we apologize for not having thought of it sooner. The drivers that would be used on your DMA-equipped sound card should be replaced by the Roland drivers, and then you choose the non-Roland sound card in the install procedure, making sure your DMA parameters are set correctly. DMA-equipped boards use one of two drivers as follows: ASOUND.DL? PSOUND.DL? (YM262/OLP3-based) ------------------------- ------------------------------ Covox Sound Master II Pro Audio Spectrum +/16 Original Sound Blaster new Sound Blaster Pro Original Sound Blaster Pro Original Pro Audio Spectrum Thunderboard ATI F/X For example, Pro Audio Spectrum 16 owners will do the following: REN PSOUND.DLC PSOUND.DC REN PSOUND.DLB PSOUND.DB COPY RSOUND.DLC PSOUND.DLC COPY RSOUND.DLB PSOUND.DLB and then select Pro Audio Spectrum 16 in the install program, setting the appropriate DMA channel and interrupt values. Enjoy!